MOT Status
ExpiredMileage
110,873 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
n/s/ brake back plate is corroded
rear beam axle is corroded
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever releases when knocked (3.1.6a)
Parking brake: efficiency below requirements (3.7.B.7)
n/s/ brake back plate is corroded
rear beam axle is corroded
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Coolant leak
Nearside Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
exhaust centre and rear sections deteriorated
Front coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear coil spring corroded (2.4.C.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Front coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear coil spring corroded (2.4.C.1b)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Upper Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP04 CNC is a 2004 Fiat Panda in Red with a 1,108cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2004 Fiat Panda models, the average MOT pass rate is 71.5% with a typical mileage of 51,788 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying CP04 CNC, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 22 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP04 CNC?
You can check the full history of CP04 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP04 CNC registered?
CP04 CNC is a 2004 Fiat Panda, first registered on 31 March 2004.
Is CP04 CNC safe to buy?
The MOT history for CP04 CNC shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP04 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP04 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.