2005 Mitsubishi Space Star

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp aim projected beam image is obviously incorrect Both front (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Brake disc worn, but not excessively Both front (1.1.14 (a) (i))

Brake disc worn, but not excessively Both rear (1.1.14 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both rear (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central exhaust bracket corroded/broken

Front Lower Suspension arm ball joint dust cover severely deteriorated o/s & n/s (5.3.4 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output o/s & n/s (4.1.4 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement o/s & n/s trailing arms (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive o/s & n/s rear inner sills (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Parking brake inoperative on one side o/s & n/s (1.4.1 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central exhaust bracket corroded/broken

Front Lower Suspension arm ball joint dust cover severely deteriorated o/s & n/s (5.3.4 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output o/s & n/s (4.1.4 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement o/s & n/s trailing arms (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive o/s & n/s rear inner sills (5.3.6 (a) (i))

EML on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Shock absorber has slight corrosion to the casing both sides rear (2.7.2a)

Suspension component mounting prescribed area is corroded but not considered excessive both sides rear inner sills (2.4.A.3)

centre to rear exhaust joint corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

EML on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Shock absorber has slight corrosion to the casing both sides rear (2.7.2a)

Suspension component mounting prescribed area is corroded but not considered excessive both sides rear inner sills (2.4.A.3)

centre to rear exhaust joint corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

EML LIGHT ON

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)