MOT Status
ExpiredMileage
88,225 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear axle mounting points corroded. (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear axle mounting points seriously corroded. (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive beam axle mount (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge shoulder (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge shoulder (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength beam axle mount (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive beam axle mount (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge shoulder (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge shoulder (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge outer edge worn (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
general corrosion underneath
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Items removed from driver's view prior to test ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced o/s and n/s rear (6.1.1 (c) (i))
brake servo corroded but intact
front brake imbalance = 20%
front suspension arm ball joint covers deteriorated but intact
handbrake lever has little reserve travel
movement in o/s/f upper door hinge but door is secure
rear axle weak with corrosion but not holed
rear brake imbalance = 24%
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Items removed from driver's view prior to test ()
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced o/s and n/s rear (6.1.1 (c) (i))
brake servo corroded but intact
front brake imbalance = 20%
front suspension arm ball joint covers deteriorated but intact
movement in o/s/f upper door hinge but door is secure
rear axle weak with corrosion but not holed
rear brake imbalance = 18%
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Rear Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)
Nearside Rear rear parking (secondary) brake grabbing slightly (3.7.B.6b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)
exhaust system has corrosion
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Indicator switch faulty (1.4.A.1)
Nearside rear brake binding (3.7.B.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
both front discs rusted
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
front brake discs lip on edge
o/s/r brake slightly binding.
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP05 YVC is a 2005 Peugeot 107 in Yellow with a 998cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2005 Peugeot 107 models, the average MOT pass rate is 71.9% with a typical mileage of 58,548 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying CP05 YVC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 21 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP05 YVC?
You can check the full history of CP05 YVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP05 YVC registered?
CP05 YVC is a 2005 Peugeot 107, first registered on 29 July 2005.
Is CP05 YVC safe to buy?
The MOT history for CP05 YVC shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP05 YVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP05 YVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.