MOT Status
ExpiredMileage
90,136 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Front Road wheel distorted inner and outer rim (4.2.A.1a)
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Offside Front Road wheel distorted inner rim (4.2.A.1a)
Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
spare wheel missing
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
spare wheel missing
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/f chassis to sus mount corrosion
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
o/s/f chassis to sus mount corrosion
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear wiper worn hard/smearing.
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear wiper worn hard/smearing.
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside front brake grabbing slightly (3.7.A.2b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP06 KXW is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 61.5%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CP06 KXW, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP06 KXW?
You can check the full history of CP06 KXW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP06 KXW registered?
CP06 KXW is a 2006 Ford Ka, first registered on 7 June 2006.
Is CP06 KXW safe to buy?
The MOT history for CP06 KXW shows 13 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP06 KXW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP06 KXW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.