MOT Status
ExpiredMileage
115,632 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal creeps down when held under pressure (3.3.B.1a)
Braking system leaking Abs pump (3.6.A.1)
Offside Front Inner Subframe mounting prescribed area is excessively corroded Floor (2.4.A.3)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Coolant leak Coolant housing ()
Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive Floor (2.4.A.3)
Nearside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive Wheel arch (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Nearside Rear Fuel cap corroded
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive Floor (5.2.6)
Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive Wheel arch (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive Floor (5.2.6)
Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Offside Rear coil spring corroded (2.4.C.1b)
n/s/f o/s/f inner wings corroded.
Driver's airbag obviously defective (5.4.1)
Nearside Headlamp aim too low (1.8)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Exhaust system not adequately supported (7.1.1)
Offside Stop lamp not working (1.2.1b)
Passenger's airbag obviously defective (5.4.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
n/s/f o/s/f inner wings corroded.
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s & o/s outer sills corroded.
n/s/f & o/s/f suspension arms housings corroded.
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Headlamp aim too low (1.8)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s & o/s outer sills corroded.
n/s & o/s outer sills corroded.
n/s/f & o/s/f suspension arms housings corroded.
Nearside Headlamp aim too high (1.8)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp aim too high (1.8)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
exaust and support brackets corroded.
Offside Front coil spring incomplete (2.4.C.1a)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
exaust and support brackets corroded.
Body has slight corrosion (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Oil leak
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has excessive play in a track control arm inner bush (2.5.B.2b)
Nearside Rear Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Offside Front suspension has excessive play in a track control arm inner bush (2.5.B.2b)
Body has slight corrosion (6.1.B.2)
Oil leak
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP06 MVO is a 2006 Ford Ka in Purple with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CP06 MVO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP06 MVO?
You can check the full history of CP06 MVO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP06 MVO registered?
CP06 MVO is a 2006 Ford Ka, first registered on 8 June 2006.
Is CP06 MVO safe to buy?
The MOT history for CP06 MVO shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP06 MVO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP06 MVO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.