MOT Status
ExpiredMileage
119,429 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bushes (5.3.4 (a) (i))
Front sub frame corroded
rear susb frame corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure is repaired but structural rigidity is not significantly reduced wheel arch (6.1.1 (d) (i))
Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced suspension arm mounting point (6.1.1 (d) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))
Offside Rear Inner Integral body structure is repaired but structural rigidity is not significantly reduced wheel arch (6.1.1 (d) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened and all suspension components attatched corroded (5.3.3 (b) (i))
hand brake lever has travel
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Both rear wheel arches corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Brake lever has insufficient reserve travel (1.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
both rear wheel arches corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner & outer sill (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner & outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1) DANGEROUS
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP08 AOU is a 2008 Honda Civic in Silver with a 1,339cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Honda Civic models, the average MOT pass rate is 74.7% with a typical mileage of 78,524 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying CP08 AOU, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 18 years old, this Honda Civic is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP08 AOU?
You can check the full history of CP08 AOU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP08 AOU registered?
CP08 AOU is a 2008 Honda Civic, first registered on 25 April 2008.
Is CP08 AOU safe to buy?
The MOT history for CP08 AOU shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP08 AOU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP08 AOU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.