MOT Status
ValidMileage
156,690 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear coil spring broken (2.4.C.1a)
Engine covers fitted obscuring some components in the engine bay
Front Lower Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Under-trays fitted obscuring some underside components
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Front Lower Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Under-trays fitted obscuring some underside components
Child seat fitted not allowing full inspection of adult belt
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
front discs badly worn
Nail in offside rear tyre
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
exhaust hangers rusted
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP08 AYV is a 2008 Mazda 5 in Black with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2008 Mazda 5 models, the average MOT pass rate is 69.5% with a typical mileage of 74,415 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying CP08 AYV, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 18 years old, this Mazda 5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP08 AYV?
You can check the full history of CP08 AYV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP08 AYV registered?
CP08 AYV is a 2008 Mazda 5, first registered on 9 July 2008.
Is CP08 AYV safe to buy?
The MOT history for CP08 AYV shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP08 AYV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP08 AYV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.