2008 Yamaha Yzf R125

Exhaust noisy (8.1.1 (a))

Fuel tank slightly loose (6.1.3 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake excessively binding (1.2.1 (f))

Headlamp insecure (4.1.1 (c))

Offside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))

Steering operation impeded by a fairing (2.1.4 (e))

Exhaust noisy (8.1.1 (a))

wiring loom loose

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Nearside Foot rest no movement, locked position

Offside Front Throttle cable catching clocks on lock to lock

Offside foot rest no movement, locked position

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Headlamp light source and lamp not compatible hidd fitted on dip beam (4.1.4 (c))

Rear Brake caliper insecure caliper worn and slide rubber missing causing caliper to bind on (1.1.16 (c) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Position lamp light intensity obviously reduced flickering (4.2.3 (a) (i))

Nearside Front clutch pivot worn

Offside Rear brake pedal bent but operable

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear number plate cracked but secure

Direction indicators flashing more than 120 times per minute both sides (1.5.1c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Rear reflector on motorcycle missing (1.4.1)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)