2008 Ford Ka

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill end (7.1.1 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill end (7.1.1 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside mirror glass damaged

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside mirror glass damaged

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill right down to rear axle (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor by sub frame (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill right down to rear axle (6.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both rear springs (5.3.1 (b) (i))

exhaust corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Coil spring corroded both rears (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

exhaust rusty

rusty on under floor both sides

rear inside sills and floor corroded both sides

Offside Front Suspension arm pin or bush excessively worn rear bush (arm) (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

Tyre tread depth below requirements of 1.6mm both front worn to wire! (5.2.3 (e)) DANGEROUS

rear inside sills and floor corroded both sides

Exhaust system corroded

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Front Wiper blade split but still clearing the windscreen

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake fluid warning lamp illuminated (3.6.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Exhaust system corroded

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Subframe mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Engine covers fitted obscuring some components in the engine bay

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)