MOT Status
ExpiredMileage
58,361 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced near axle mount corroded (6.1.1 (c) (i))
Oil leak, but not excessive engine has slight oil leak (8.4.1 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn rear (complete arm) (5.3.4 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush excessively worn rear (complete arm) (5.3.4 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
front sub frame corroded and body corroded
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside rear arch on end of chassis rail (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
front sub frame corroded and body corroded
Coolant leak ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i))
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i))
Coolant leak ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Body has slight corrosion Nearside front chassis (6.1.B.2)
Body has slight corrosion Nearside front inner arch (6.1.B.2)
Body has slight corrosion Nearside rear inner arch (6.1.B.2)
Body has slight corrosion Nearside sill (6.1.B.2)
Body has slight corrosion Offside front chassis (6.1.B.2)
Body has slight corrosion Offside front inner arch (6.1.B.2)
Body has slight corrosion Offside rear inner arch (6.1.B.2)
Body has slight corrosion Offside sill (6.1.B.2)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Bonded suspension unit deteriorated but can function as intended lower arm rear bush (2.4.F.3)
Offside Front Bonded suspension unit deteriorated but can function as intended lower arm rear bush (2.4.F.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Stop lamp not working (1.2.1b)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight condensation off/side head lamp
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nail in offside rear tyre
slight condensation off/side head lamp
front brake discs worn on inner edge
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP08 MYB is a 2008 Ford Ka in Black with a 1,599cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CP08 MYB, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP08 MYB?
You can check the full history of CP08 MYB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP08 MYB registered?
CP08 MYB is a 2008 Ford Ka, first registered on 31 May 2008.
Is CP08 MYB safe to buy?
The MOT history for CP08 MYB shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP08 MYB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP08 MYB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.