2011 Hyundai IX20

Front Subframe mounting prescribed area is corroded but not considered excessive subframe and mountings (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Fuel tank leaking (6.1.3 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive subframe and mountings (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate insecure but not likely to fall off (0.1 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate insecure but not likely to fall off (0.1 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake disc significantly and obviously worn both (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Axle corroded

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Axle corroded

Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Lower lower bracing bar (below chassis) non structural box section is holed, corroded and weakened

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear beam axle and lower spring cups heavily corroded (5.3.6 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Fluid leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner (5.2.3 (e))

Rear Axle corroded

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Coil spring insecure (5.3.1 (a) (i))

Nearside Front Fluid leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner (5.2.3 (e))

Rear Axle corroded

Handbrake 16%. Nearside effort poor

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nail in offside rear tyre

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)