2012 Mazda 6

Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Suspension arm fractured (5.3.3 (b) (ii)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened & Suspension Components (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Sub-frame corroded but not seriously weakened & Suspension Components (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both (4.7.1 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

surface corrosion on rear subframe.

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

surface corrosion on rear crossmember.

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all radious arms (5.3.3 (b) (i))

All four brakes are slightly binding

Coil spring corroded All four (5.3.1 (b) (i))

Engine cover and under trays fitted at time of test.

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive car floor all (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened All radious arms and trailing arms (5.3.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

All four brakes are slightly binding

Coil spring corroded All four (5.3.1 (b) (i))

Engine cover and under trays fitted at time of test.

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive car floor all (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened All radious arms and trailing arms (5.3.3 (b) (i))

Anti-roll bar linkage corroded but not seriously weakened all four (2.4.G.1)

Engine cover and under trays fitted at time of test.

Radius arm corroded but not seriously weakened all (2.4.G.1)

Sub-frame corroded but not seriously weakened both front and rear (2.4.G.1)

coil spring corroded all four (2.4.C.1b)

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Suspension arm corroded but not seriously weakened all rear (2.4.G.1)

manufactures engine covers fitted preventing full inspection of some engine bay components

manufactures under trays fitted preventing full inspection of some underside components

Prop-shaft flange bolt(s) loose/missing

Under-trays fitted obscuring some underside components