2012 Ford Fiesta

Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Beam axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Beam axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Play in steering rack inner joint(s) ()

Nearside Rear Suspension component pin or bush slightly worn axle bush (5.3.4 (a) (i))

Nearside Rear brake binding when rotated by hand

Offside Rear Suspension component pin or bush slightly worn axle bush (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension component pin or bush slightly worn axle bush (5.3.4 (a) (i))

Nearside Rear brake binding when rotated by hand

Offside Rear Suspension component pin or bush slightly worn axle bush (5.3.4 (a) (i))

Exhaust emissions exceed manufacturer's specified limit 0.62 plate limit (8.2.2.2 (a))

Exhaust has a major leak of exhaust gases Rear box holed (6.1.2 (a))

Fuel system component leaking Fill pipe (6.1.3 (b) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Corrosion starting at front floors

Corrosion within PA. Rear suspension os and NS. Front suspension ns

Engine oil dip stick not fitted correctly on arrival.

Nsf anti roll bar link has play

Nsr valve hidden behind wheel trim

Osr park brake lagging in operation

Rear exhaust mount broken

Under guards fitted to corroded areas

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Horn not working (7.7 (a) (ii))

Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust noisy Outer skin corroded and holed on rear box (7.1.4)

Windscreen washer provides insufficient washer liquid (8.2.3)