2001 Mazda 323

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with 30cm of nsf strut and ns engine mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of the sill holed (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced of the sil holed (7.1.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of the sill holed (5.3.6 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

vehicles been undersealed

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake pedal has insufficient reserve travel Brake Travel Exessive (1.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & Outer Sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

corrosion to front and rear subframe corrosion to rear inner sills x2

exhaust system corroded

rear wiper worn/split

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake hose slightly chafed (3.6.B.4d)

Brake fluid warning lamp illuminated (3.6.G.2)

Headlamp aim too high (1.8)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside front brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Slight cut in n/s/f tyre sidewall

Offside Inner Front brake disc excessively pitted (3.5.1h)

Nearside Inner Front brake disc slightly pitted (3.5.1h)

Slight cut in n/s/f tyre sidewall