MOT Status
ExpiredMileage
119,148 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions not tested Excessive blue smoke from exhaust (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Nail in tyre ()
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside front abs sensor securing bolt broken
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Tyre worn close to legal limit/worn on edge also deteriorated (5.2.3 (e))
Front exhaust bracket corroded
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Rear Brake pipe slightly corroded (3.6.B.2c)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Electronic stability system warning lamp indicates a fault (3.4.1c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust system not adequately supported (7.1.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim too low (1.8)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
n/s/f tyre worn on inner tread pattern
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Rear coil spring fractured (2.4.C.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
engine management light on
n/s/f tyre worn on inner tread pattern
brake pad warning light on
eng man light on co level high on test on fast idle
rear hub componants showing corrosion
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
brake pad warning light on
eng man light on co level high on test on fast idle
rear hub componants showing corrosion
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
REAR NUMBER PLATE SLIGHTLY DISCOULERED
How Reliable is the BMW 316?
Based on 1,210,990 MOT tests across 108,989 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP53 CNC is a 2003 BMW 316 in Silver with a 1,796cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2003 BMW 316 models, the average MOT pass rate is 73.3% with a typical mileage of 73,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 316 fails its MOT is brake pipe excessively corroded, accounting for 71,150 recorded failures. If you're considering buying CP53 CNC, it's worth having these areas checked by a mechanic before committing.
The BMW 316 typically stays on UK roads for around 38 years. At 23 years old, this BMW 316 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP53 CNC?
You can check the full history of CP53 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP53 CNC registered?
CP53 CNC is a 2003 BMW 316, first registered on 29 November 2003.
Is CP53 CNC safe to buy?
The MOT history for CP53 CNC shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP53 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP53 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.