2005 Audi A4

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened various rear arms both sides (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened various rear arms both sides (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pad(s) wearing thin front and back (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened various arms (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both rear tyres (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pad(s) wearing thin front and back (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened various arms (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both rear tyres (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge all 4 tyres (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

All standard equipment guards fitted at time of test not allowing full inspection

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake hose slightly deteriorated both rear (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

parking brake only just met minimum required performance

All standard equipment guards fitted at time of test not allowing full inspection

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake hose slightly deteriorated both rear (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

parking brake only just met minimum required performance

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both front tyres (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Suspension arm ball joint has slight play both sides upper and lower (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

under-trays fitted obscuring some parts

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear coil spring broken (2.4.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit 2.0mm close to exposing cords on outer edge 205/55/16 (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Nearside Headlamp aim too high (1.8)

Vehicle's internal headlight adjuster altered to recheck lights

Child seat fitted not allowing full inspection of adult belt

Vehicle's internal headlight adjuster altered to recheck lights

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

brake pad warning light on

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)