MOT Status
ValidMileage
207,054 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brake pad(s) wearing thin both side (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brake pad(s) wearing thin both side (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Front Coil spring corroded Both side (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both side (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both side (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
plastic covers fitted at time of test
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
plastic covers fitted at time of test
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
parking brake cable outer casing chafed
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Brake valve leaking bleed screw loose (1.1.7 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
parking brake cable outer casing chafed
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Position lamp not working side (4.2.1 (a))
Offside Front Position lamp light intensity significantly reduced side (4.2.3 (a) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear caliper damp
Offside Rear parking brake poor effort
clutch master cylinder slight seepage
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin 80% worn (1.1.13 (a) (ii))
Rear both brake hose ferrels corroded
Front SMALL STONE CHIPS TO WINDSCREEN
Nearside Rear Shock absorber has a light misting of oil LEAKING (2.7.3)
Offside Rear SEAT BELT WARNING INOP
Offside Rear Shock absorber has a light misting of oil LEAKING (2.7.3)
Valve stem slightly damaged ALL 4 VALVES PERISHED (4.1.D.1e)
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps FITTED IN WRONG PLACE (BUMPER BROKEN) (1.1.C.1a)
Offside Rear Brake pad(s) less than 1.5 mm thick WORN OUT (BINDING SLIGHTLY) (3.5.1g)
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps DIRTY INSIDE & BULB DIM (1.1.C.1a)
Front SMALL STONE CHIPS TO WINDSCREEN
Nearside Rear Shock absorber has a light misting of oil LEAKING (2.7.3)
Offside Rear SEAT BELT WARNING INOP
Offside Rear Shock absorber has a light misting of oil LEAKING (2.7.3)
Valve stem slightly damaged ALL 4 VALVES PERISHED (4.1.D.1e)
Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Front Front position lamp(s) not working both (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
offside rear tyre on 2mm towards inner edge
plastic covers fitted to sills and under vehicle at time of test
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP58 AVY is a 2008 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CP58 AVY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP58 AVY?
You can check the full history of CP58 AVY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP58 AVY registered?
CP58 AVY is a 2008 Mazda 3, first registered on 27 November 2008.
Is CP58 AVY safe to buy?
The MOT history for CP58 AVY shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP58 AVY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP58 AVY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.