MOT Status
ValidMileage
137,381 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive and suspension components (5.3.6 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened s (5.3.3 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened s (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear exhaust heat shield insecure
Central Rear Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Central Rear Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both rear (6.1.1 (c) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))
Rear Exhaust system insecure hanger (6.1.2 (a))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both rear (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front fog light
Rear exhaust shield loose
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Centre exhaust heat shield deteriorated.
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Fog light inop.
Oil leak, but not excessive Sump corroded. (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear suspension component mounting precribed area is corroded but not considered excessive
Nearside Rear vehicle structure slightly corroded within 30cm of towbar mounting
Offside Rear suspention component mounting prescribed area is corroded but not considered exsessive
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))
Nearside Rear suspension component mounting precribed area is corroded but not considered excessive
Nearside Rear vehicle structure slightly corroded within 30cm of towbar mounting
Offside Rear suspention component mounting prescribed area is corroded but not considered exsessive
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front wipers starting to smear sceen
offside front tyre starting to wear on inner edge
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front tyres wearing on edges
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP58 DWO is a 2009 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2009 Mazda 3 models, the average MOT pass rate is 76.2% with a typical mileage of 67,384 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CP58 DWO, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 17 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP58 DWO?
You can check the full history of CP58 DWO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP58 DWO registered?
CP58 DWO is a 2009 Mazda 3, first registered on 28 January 2009.
Is CP58 DWO safe to buy?
The MOT history for CP58 DWO shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP58 DWO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP58 DWO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.