Free Car Check
2013 Isuzu D-max Utah D/c Twin Turbo Td
MOT Status
ValidMileage
59,246 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Handbrake effort only just meet requirements
Offside rear tyre wearing low in middle
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Front Windscreen washer not working (3.5 (a))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Parking brake inoperative on one side very slow to respond (1.4.1 (a))
Exhaust has a minor leak of exhaust gases BACK BOX (6.1.2 (a))
Rear Shock absorbers has slight external damage to the casing BOTH (5.3.2 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Front Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front service brake binding
Nearside Rear Towbar component corroded, but not excessively (6.1.6 (a))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Towbar component corroded, but not excessively (6.1.6 (a))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front service brake binding
Nearside Rear Towbar component corroded, but not excessively (6.1.6 (a))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Towbar component corroded, but not excessively (6.1.6 (a))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Plastic trims shields and guards covering some perscribed areas.
How Reliable is the Isuzu D-max Utah D/c Twin Turbo Td?
Based on 1,421 MOT tests across 191 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP63 FJZ is a 2013 Isuzu D-max Utah D/c Twin Turbo Td in White with a 2,499cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 71.4%.
Across all 2013 Isuzu D-max Utah D/c Twin Turbo Td models, the average MOT pass rate is 79.5% with a typical mileage of 81,716 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Isuzu D-max Utah D/c Twin Turbo Td fails its MOT is shock absorber has an excessively worn bush, accounting for 17 recorded failures. If you're considering buying CP63 FJZ, it's worth having these areas checked by a mechanic before committing.
The Isuzu D-max Utah D/c Twin Turbo Td typically stays on UK roads for around 13 years. At 13 years old, this Isuzu D-max Utah D/c Twin Turbo Td is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CP63 FJZ?
You can check the full history of CP63 FJZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP63 FJZ registered?
CP63 FJZ is a 2013 Isuzu D-max Utah D/c Twin Turbo Td, first registered on 15 October 2013.
Is CP63 FJZ safe to buy?
The MOT history for CP63 FJZ shows 14 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP63 FJZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP63 FJZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.