2003 Honda XL125V

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play Lower shock pivot (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Front shock absorber seal failed and leaking oil Both fork oil seals (2.3.3)

Front suspension has inadequate damping effect. (2.3.6c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Exhaust has part of the system missing (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Inner Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

rear tyre has numerous cuts, not deep

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Handlebar deformed (2.1.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear mono-shock pivot excessively worn (2.4.B.4)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)