2003 Mercedes-benz Cl 500

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Central Rear Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust system insecure n/s + o/s (6.1.2 (a))

Central Rear Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement forward bush (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Front wheel bearing has slight play x2 both sides (2.5.A.3c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Inner Suspension arm has slight play in a ball joint forward rose bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

covers fitted

Nearside Front Inner Suspension arm has excessive play in a ball joint shocker ball joint at base of shocker (2.4.G.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Front Lower Suspension arm has excessive play in a ball joint ball joint at base of shocker (2.4.G.2)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Front Front wheel bearing has slight play x2 both sides (2.5.A.3c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Inner Suspension arm has slight play in a ball joint forward rose bush (2.4.G.2)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

covers fitted

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear rear exhaust hangers corroded/thin

covers fitted

Nearside Front Shock absorber has a slightly worn shock absorber pivot (2.7.4)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has a slightly worn shock absorber pivot (2.7.4)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)