MOT Status
ExpiredMileage
95,575 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis/inner bay (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Brake cable insecure (3.5.1d)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Body has slight corrosion (6.1.B.2)
Fuel system component insecure (7.2.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
n s outer sill got slight corrosion
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
O/s outer sill corroded.
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
advise boot floor corroded outside prescibed areas
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
advise boot floor corroded outside prescibed areas
Exhaust has part of the system slightly deteriorated (7.1.1a)
Centre Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front Headlamp aim too low (1.8)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU03 ZHG is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CU03 ZHG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CU03 ZHG?
You can check the full history of CU03 ZHG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU03 ZHG registered?
CU03 ZHG is a 2003 Ford Ka, first registered on 31 March 2003.
Is CU03 ZHG safe to buy?
The MOT history for CU03 ZHG shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU03 ZHG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU03 ZHG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.