2004 Peugeot Boxer

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front chassis holed and corroded

Offside Front door step holed and corroded

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front both inner arch by flexi mounting point

Nearside Front suspension has a knocking noise but nothing found during test

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Inner both wheel arches have corrosion by flexi mounting point

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Inner both wheel arches have corrosion by flexi mounting point

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Suspension arm corroded but not seriously weakened both front and brake items (5.3.3 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Suspension arm corroded but not seriously weakened both front and brake items (5.3.3 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Rear Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii))

exhaust silencer corroded

general corrosion throughout vehicle

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member/radiator support (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

exhaust silencer corroded

general corrosion throughout vehicle

Central Exhaust mounting defective (6.1.2 (a))

Exhaust box outer skin corroded

General underside corrosion

Rear Towbar component corroded, but not excessively (6.1.6 (a))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both inner arches (5.3.6 (a) (i))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front jacking points both sides (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Central Exhaust mounting defective (6.1.2 (a))

Exhaust box outer skin corroded

General underside corrosion

Rear Towbar component corroded, but not excessively (6.1.6 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under step (7.1.1 (a) (i))

various areas of corrosion

various areas of corossion

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Horn not working (1.6.2a)

Front Horn not working (1.6.2a)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Centre Stop lamp not working (1.2.1b)

Horn not working (1.6.2a)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)