2004 Nissan Navara

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak ()

Vehicle structure has slight corrosion all chassis has surface rust on it (6.1.B.2)

exhaust coroded

shock absorber outer upper covers rusty and corroded

Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember across chassis rusty and holed (6.1.B.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner chassis holed (6.1.B.2)

Rear Exhaust system not adequately supported exhaust box bracket snapped (7.1.1)

Oil leak ()

Vehicle structure has slight corrosion all chassis has surface rust on it (6.1.B.2)

shock absorbers outer upper covers rusty and corroded

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

both rear body mounts heavily corroded

brackets on rear diff heavily corroded

centre chassis cross member heavily corrode

rear exhaust hanger broke

under trays fitted restricting general view of some underside components

underside of vehicle has corrosion

Brake pipe slightly corroded (3.6.B.2c)

all underneath of vehicle is corroded

exhaust bolts that joins back section to middle section are heavily corroded

o/s/r body mount heavily corroded

propshaft mounting crossmember is heavily corroded

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

both front wheels binding slightly

exhaust bolts that joins back section to middle section are heavily corroded

o/s/r brake pipe/brake hose mounting heavily corroded

propshaft mounting crossmember is heavily corroded

Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

all shock absorber upper caseings has rotted away

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear rear brake binding (3.7.B.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Spare wheel insecure (6.4.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

all shock absorber upper caseings has rotted away

two bits of exhaust rings loose on exhaust makeing a noise

The rear chassis on both sides is corroding slightly.

Front Steering system excessively tight (2.2.D.1)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.C.1b)

The both front brake discs are corroding slightly on the inner surfaces.

Both front brake discs are corroding on the inner surfaces.

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate insecure (6.3.1b)

The n/s/f tyre is right on the 1.6mm limmit.

The o/s/f wheel is stiff to turn.

Both front brake discs are corroding on the inner surfaces.

Rear Brake pipe slightly corroded (3.6.B.2c)

The n/s/f tyre is right on the 1.6mm limmit.

The o/s/f wheel is stiff to turn.

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake discs are starting to rust.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)