2004 Iveco Daily

Offside Front Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive gearbox output seal. (8.4.1 (a) (i))

various corrosion to underside of body, not significantly affecting structural rigidity.

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive gearbox output seal. (8.4.1 (a) (i))

various corrosion to underside of body, not significantly affecting structural rigidity.

Rear Exhaust has a minor leak of exhaust gases and rear pipe condition (6.1.2 (a))

high level stop light not working

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component pin or bush slightly worn Rear bush and hanger bush worn (5.3.4 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component pin or bush slightly worn Rear bush and hanger bush worn (5.3.4 (a) (i))

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush top bush (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Nail in tyre ()

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

n/s/r oil seal leaking

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

rear bump stops close to the axle beam

wear in both front body moutings

Offside Rear Seat belt affected by an insecure seat fixing (5.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Tested as a class 4 PSV (up to 8 seats) not as a class 7 goods vehicle as stated on previous MOT. 7 passenger seats fitted at time of test.