MOT Status
ExpiredMileage
105,755 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Underside corroded and has had various welding
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Obligatory mirror slightly loose (3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
brake backplates corroded
nearside inner sill rusted+holed outside prescribed area
reversing lights inoperative
unable to visually inspect inner brake pads
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Inner Extensive holes caused by corrosion front to back
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Vehicle structure has slight corrosion Front to back (6.1.B.2)
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Nearside Front Lower Shock absorber insecure (2.7.2b)
Nearside Rear brake disc contaminated by oil (3.5.1h)
Offside Front Suspension arm corroded and seriously weakened (2.4.G.1) DANGEROUS
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Inner Extensive holes caused by corrosion front to back
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Vehicle structure has slight corrosion Front to back (6.1.B.2)
all brake hose ferrules showing corrosion
deep & extensive corrosion showing on entire chassis & front & rear suspension components
extensive holes caused by corrosion on nearside sill
nearside rear hub seal showing signs of leaking slightly
Brake load sensing valve defective and function impaired (3.6.E.3)
Parking brake: efficiency below requirements (3.7.B.7)
Parking brake lever has no reserve travel offside cable broken (3.1.6b) DANGEROUS
all brake hose ferrules showing corrosion
deep & extensive corrosion showing on entire chassis & front & rear suspension components
extensive holes caused by corrosion on nearside sill
nearside rear hub seal showing signs of leaking slightly
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front & rear brake hose ferrules corroded
heavy & extensive corrosion on front & rear suspension components, braking components & entire chassis
nearside rear hub seal leaking
Offside Front Lower Shock absorber detached (2.7.2b)
Offside Front Suspension arm corroded and seriously weakened (2.4.G.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp emits a light other than red (1.3.2e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front & rear brake hose ferrules corroded
heavy & extensive corrosion on front & rear suspension components, braking components & entire chassis
nearside rear hub seal leaking
unable to open side door
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
front brake discs worn
n/s front tyre wearing on outside
o/s front brake binding slightiy needs attention
all four brake discs worn but serviceable
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
hand brake effiency low just about made minimum effiency
How Reliable is the Iveco Daily?
Based on 817,098 MOT tests across 76,231 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU05 HND is a 2005 Iveco Daily in White with a 2,287cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2005 Iveco Daily models, the average MOT pass rate is 64.0% with a typical mileage of 112,037 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Iveco Daily fails its MOT is parking brake: efficiency below requirements, accounting for 54,319 recorded failures. If you're considering buying CU05 HND, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily typically stays on UK roads for around 30 years. At 21 years old, this Iveco Daily is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CU05 HND?
You can check the full history of CU05 HND by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU05 HND registered?
CU05 HND is a 2005 Iveco Daily, first registered on 12 May 2005.
Is CU05 HND safe to buy?
The MOT history for CU05 HND shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU05 HND have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU05 HND. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.