2008 Honda Civic

Manufactures engine and body covers fitted restricting inspection of components

Offside Front hub corroded

Rear underbody corroded

Headlamp lens seriously defective both no dip pattern (4.1.1 (b) (ii))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake hose ferrule excessively corroded body to axle (1.1.12 (f) (i))

Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Manufactures engine and body covers fitted restricting inspection of components

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front hub corroded

Rear underbody corroded

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake hose has slight corrosion to ferrule body to axle (1.1.12 (f) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

corrosion on rear underbody

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake hose has slight corrosion to ferrule body to axle (1.1.12 (f) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

corrosion on rear underbody

both dip pattern poor

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))

Spare tyre defective flat ()

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Suspension arm corroded and seriously weakened axle beam (5.3.3 (b) (i))

Front under tray loose

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))

Spare tyre defective flat ()

both dip pattern poor

exhaust heat shields loose

Manufactures engine and body covers fitted restricting inspection of components

Nearside Headlamp lens seriously defective no dip pattern (4.1.1 (b) (ii))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp lens seriously defective no dip pattern (4.1.1 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Manufactures engine and body covers fitted restricting inspection of components

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

clonk noise from steering when rocked

surface corrosion on rear floors

Offside Rear Brake hose ferrule excessively corroded body to axle (1.1.12 (f) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

clonk noise from steering when rocked

surface corrosion on rear floors

Central Rear axle beam rusting

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Axle deformed and unserviceable Rear axle excessively corroded (5.1.1 (a)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear brake hose ferruel rusty

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)