2009 Hyundai I10

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Unable to see thickness of rear brake pads

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 65 39 106 (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 65 39 106 (1.2.1 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Seats Folded Down Preventing Inspection of Receivers

front number plate cracked slightly

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Lower coil spring corroded (2.4.C.1b)

Offside Rear Lower coil spring corroded (2.4.C.1b)

Front number plate cracked slightly

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake binding (3.7.B.1)

Front number plate cracked slightly

n/s/f and o/s/f wheels slightly binding

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

n/s/f and o/s/f wheels slightly binding

Items removed from driver's view prior to test

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

unable to see rear brake pads fully

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Headlamp aim too low (1.8)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Items removed from driver's view prior to test

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

unable to see rear brake pads fully

off side rear tyre worn on inside edge