MOT Status
ValidMileage
276,595 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) DANGEROUS
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Horn not working (7.7 (a))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Rear d bush
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Direction indicator slightly discoloured (4.4.3 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Outline marker lamp not working on sliding door (4.2.1 (a) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively blade missing (3.4 (b) (ii))
Offside Outline marker lamp not working all (4.2.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Direction indicator slightly discoloured (4.4.3 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))
Offside Outline marker lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))
Offside Rear Direction indicator incorrect colour (4.4.3 (a))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake fluid warning lamp illuminated (1.1.10 (f))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre split on sidewall
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake fluid warning lamp illuminated (3.6.G.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre split on sidewall
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Front position lamp(s) not working (1.1.A.3b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nail in offside rear tyre
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Iveco Daily 35S12 LWB?
Based on 17,415 MOT tests across 1,451 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU10 CAA is a 2010 Iveco Daily 35S12 LWB in White with a 2,287cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 52%.
Across all 2010 Iveco Daily 35S12 LWB models, the average MOT pass rate is 65.7% with a typical mileage of 144,371 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily 35S12 LWB fails its MOT is parking brake: efficiency below requirements, accounting for 1,255 recorded failures. If you're considering buying CU10 CAA, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily 35S12 LWB typically stays on UK roads for around 22 years. At 16 years old, this Iveco Daily 35S12 LWB is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CU10 CAA?
You can check the full history of CU10 CAA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU10 CAA registered?
CU10 CAA is a 2010 Iveco Daily 35S12 LWB, first registered on 31 March 2010.
Is CU10 CAA safe to buy?
The MOT history for CU10 CAA shows 25 tests with a 52% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU10 CAA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU10 CAA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.