2010 Rieju Mrt 50

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit 1.6mm (4.1.3(ii))

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Chain guard insecure (6.2.1c)

Front Direction indicator flashing less than 60 times a minute O/S and N/S (1.5.1c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Horn not working (1.7.3a)

Rear Brake component damaged and seriously reduced in strength brake pads (3.2.A1)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Direction indicator not working O/S and N/S (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate deteriorated (6.3.1d)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit 1.6mm (4.1.3(ii))

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Direction indicator flashing less than 60 times a minute N/S and O/S (1.5.1c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel adjuster (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicator not working N/S and O/S (1.5.1c)

Rear Registration plate deteriorated (6.3.1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Direction indicator flashing less than 60 times a minute N/S and O/S (1.5.1c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel adjuster (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicator not working N/S and O/S (1.5.1c)

Rear Registration plate deteriorated (6.3.1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))