MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Play in steering rack inner joint(s) ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front arch corroded
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear valance heavily corroded
vehicle undersealed
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Play in steering rack inner joint(s) ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front arch corroded
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear valance heavily corroded
vehicle undersealed
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill (7.1.1 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Side repeater incorrect colour also lens missing (4.4.3 (a))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength entire sill (5.3.6 (a) (i))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner arch corroded
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Play in steering rack inner joint(s) ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))
Rear valance heavily corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front wheel arch corroded
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
both rear bumper mounting areas excessively corroded
Brake lever has insufficient reserve travel (1.1.2 (a))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Upper Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i))
Windscreen washer not working (3.5 (a))
Nearside Rear Outer Brake pad(s) missing (1.1.13 (c)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner arch excessively corroded
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material all pipes waxoyled (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
vehicle waxoyled
Exhaust has a major leak of exhaust gases downpipe (6.1.2 (a))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material all pipes waxoyled (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
vehicle waxoyled
Horn not working (1.6.2a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Seat belt anchorage prescribed area is excessively corroded sills and inner box sections (5.2.6)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Seat belt anchorage prescribed area is excessively corroded sills and inner box sections (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Brake pipe slightly corroded all original cannot fully access/many under sealed (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Inner wing corroded
Oil leak ()
Play in steering rack inner joint(s) ()
Body has slight corrosion nearside & offside inner sills & floor pan area's corroding (6.1.B.2)
Body has slight corrosion rear cross member & under body area's (6.1.B.2)
Exhaust has a minor leak of exhaust gases down pipe (7.1.2)
Nearside Front Body has slight corrosion box section area's corroding outside a prescribed area (6.1.B.2)
Offside Front Body has slight corrosion inner sill & box section area's corroding outside a prescribed area (6.1.B.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg area's marked in yellow (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch area's within top mount prescribed area's visible from engine bay (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area's marked in yellow (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section area's marked in yellow (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area's marked in yellow (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Body has slight corrosion nearside & offside inner sills & floor pan area's corroding (6.1.B.2)
Body has slight corrosion rear cross member & under body area's (6.1.B.2)
Exhaust has a minor leak of exhaust gases down pipe (7.1.2)
Nearside Front Body has slight corrosion box section area's corroding outside a prescribed area (6.1.B.2)
Offside Front Body has slight corrosion inner sill & box section area's corroding outside a prescribed area (6.1.B.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
rear under body/suspension corroded
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Lower Ball joint has excessive play (2.2.B.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
rear exhaust mounting missing
rear under body/suspension corroded
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
sills extensivlet welded,o/s sill heavily corroded,underside of vehicle heavily corroded
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front coil spring modified and seriously weakened (2.4.A.2)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front coil spring modified and seriously weakened (2.4.A.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate deteriorated (6.3.1d)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
sills extensivlet welded,o/s sill heavily corroded,underside of vehicle heavily corroded
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
all underbody corroded
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
all underbody corroded
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
bonnet safety catch faulty
lowering clamps fitted to front springs
nearside and offside front metal brake pipe corroded
nearside and offside inner sills corroded
nearside and offside outer sills corroded
non standard road wheels fitted
rear No plate deteriorated
vehicle has a lot of heavy surface corrosion to structure,sub structure,chassis and suspension components
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
bonnet safety catch faulty
imbalance of 39% between rear brakes
lowering clamps fitted to front springs
nearside and offside front metal brake pipe corroded
nearside and offside inner sills corroded
nearside and offside outer sills corroded
non standard road wheels fitted
rear No plate deteriorated
vehicle has a lot of heavy surface corrosion to structure,sub structure,chassis and suspension components
nearside handbrake slow releasing
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
heavy surface corrosion to rear chassis and suspension mountings
nearside and offside inner and outer sills corroded
nearside rear metal brake pipe corroded
vehicle has clamps fitted to front road springs to make it lower
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Side repeater slightly discoloured (1.4.A.2f)
Brakes imbalanced across an axle (3.7.B.5b)
Front front brake application uneven (3.7.B.2)
Offside Stop lamp not working (1.2.1b)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU51 ABN is a 2001 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 55.6%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying CU51 ABN, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CU51 ABN?
You can check the full history of CU51 ABN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU51 ABN registered?
CU51 ABN is a 2001 Mercedes-benz Vito, first registered on 1 September 2001.
Is CU51 ABN safe to buy?
The MOT history for CU51 ABN shows 27 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU51 ABN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU51 ABN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.