MOT Status
ExpiredMileage
67,398 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Manufactures engine and body covers fitted restricting inspection of components
Sub-frame corroded but not seriously weakened rear axle beam (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both side rear (5.3.6 (a) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))
Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
all 4 tyres are deteriorated/cracking
rear axle beam corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement back bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
both rear brake hose ferrules corroded
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)
rear suspension beam is corroded
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (2.4.A.3)
Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber,both (2.4.A.3)
Headlamp deteriorated but light output not reduced both (1.7.5a)
Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust corroded and weak
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear inner sills corroded
near side rear top shock absorber mounting area corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear inner sills corroded
near side rear top shock absorber mounting area corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
How Reliable is the Peugeot 307?
Based on 5,095,133 MOT tests across 320,070 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU51 TRE is a 2001 Peugeot 307 in Silver with a 1,587cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 84.2%.
Across all 2001 Peugeot 307 models, the average MOT pass rate is 64.6% with a typical mileage of 77,176 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 307 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 275,886 recorded failures. If you're considering buying CU51 TRE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 307 typically stays on UK roads for around 25 years. At 25 years old, this Peugeot 307 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CU51 TRE?
You can check the full history of CU51 TRE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU51 TRE registered?
CU51 TRE is a 2001 Peugeot 307, first registered on 3 September 2001.
Is CU51 TRE safe to buy?
The MOT history for CU51 TRE shows 19 tests with a 84.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU51 TRE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU51 TRE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.