MOT Status
ExpiredMileage
139,240 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Oil leak ()
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit tyre perished (4.1.E.1)
Offside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Rear Brake load sensing valve stiff (3.6.E.3)
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Oil leak engine oil ()
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Battery insecure (1.9.1)
Front Headlamp excessively deteriorated so that the light output is severely reduced nearside and offside (1.7.5a)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Oil leak engine oil ()
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
oil leak
Battery insecure (1.9.1)
Brake load sensing valve seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Side repeater not working (1.4.A.2c)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Side repeater incorrect colour (1.4.A.2f)
oil leak
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake load sensing valve seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Side repeater not working (1.4.A.2c)
Offside Side repeater not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake load sensing valve seized (3.6.E.3)
Brake pedal spongy (3.3.B.1b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
front brake discs worn
o/s/r wing damaged
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
front brake discs worn
o/s/r wing damaged
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU52 KTC is a 2002 Peugeot 206 in Blue with a 1,124cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying CU52 KTC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CU52 KTC?
You can check the full history of CU52 KTC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU52 KTC registered?
CU52 KTC is a 2002 Peugeot 206, first registered on 7 September 2002.
Is CU52 KTC safe to buy?
The MOT history for CU52 KTC shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU52 KTC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU52 KTC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.