MOT Status
ExpiredMileage
219,773 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
O/s sill and inner sill corroded
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
O/s sill and inner sill corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
O/s sill corroded
Offside Front Coil spring corroded (5.3.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
O/s sill corroded
Offside Front Coil spring corroded (5.3.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake pedal has insufficient reserve travel (1.1.2 (a))
Nearside Headlamp aim too high (4.1.2 (a))
Offside Front Position lamp not working (4.2.1 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
O/s/sill corroded
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake load sensing valve seized (3.6.E.3)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength chassis (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Horn not working (1.6.2a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Brake valve retaining device insecure (3.6.A.2d)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Horn not working (1.6.2a)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Brake load sensing valve seized (3.6.E.3)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Brake valve insecurely mounted (3.6.A.2a)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Brake load sensing valve seized (3.6.E.3)
Nearside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
fuel tank strap corroded.
Front coil spring corroded (2.4.C.1b)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Front coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
fuel tank straps corroded
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front coil spring corroded (2.4.C.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
fuel tank straps corroded
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel tank strap badly detorated
noose wheel bearing on vehicle unable to find out which one
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
noose wheel bearing on vehicle unable to find out which one
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CU52 ZZY is a 2002 Peugeot 206 in Silver with a 1,398cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying CU52 ZZY, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CU52 ZZY?
You can check the full history of CU52 ZZY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CU52 ZZY registered?
CU52 ZZY is a 2002 Peugeot 206, first registered on 30 September 2002.
Is CU52 ZZY safe to buy?
The MOT history for CU52 ZZY shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CU52 ZZY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CU52 ZZY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.