2003 Toyota Land Cruiser

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER ARCH (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER ARCH (7.1.1 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Brake pad(s) wearing thin all front (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both outer sills covered with plastic guards.

rear seats removed from vehicle.

whole of chassis corroded.

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Suspension arm ball joint has slight play both front upper. (5.3.4 (a) (i))

both outer sills covered by plastic trim.

o/s rear brake disc back plate corroded.

rear seats removed from vehicle.

whole of chassis corroded but not weakened.

Covers fitted to both outer sills

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure slightly damaged within 30cm of towbar mounting (6.6.6)

Whole of chassis corroded but not weakened

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Tyre worn close to the legal limit both front (4.1.E.1)

covers fitted to both outer sills.

whole of chassis corroded but not weakened.

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

wear in n/s/f driveshaft.

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Direction indicator not working (1.4.A.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

wear in n/s/f driveshaft.

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

front and rear discs badly lipped

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

unable to veiw rear brake pads.