2004 Mazda 3

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor (5.3.6 (a) (ii)) DANGEROUS

Items removed from driver's view prior to test ()

Nearside Front seat base worn

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre obviously under inflated (5.2.3 (l))

General under body corrosion advise "wax oil"

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Sill and floor area (6.1.1 (c) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Sill and floor area (6.1.1 (c) (i))

Offside Front Lower Vehicle structure is fractured but structural rigidity is not significantly reduced Sill area (6.1.1 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Sill and floor area (6.1.1 (c) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Sill and floor area (6.1.1 (c) (i))

Offside Front Lower Vehicle structure is fractured but structural rigidity is not significantly reduced Sill area (6.1.1 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Subframe mounting prescribed area is corroded but not considered excessive Both outer sills (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded Floor (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Subframe mounting prescribed area is corroded but not considered excessive Both outer sills (2.4.A.3)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link (2.4.G.2)

Offside Front Suspension spring mounting prescribed area is excessively corroded Floor (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear brake disc modified and seriously weakened (3.5.1n)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint Droplink (2.4.G.2)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Items removed from driver's view prior to test

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Items removed from driver's view prior to test

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle's internal headlight adjuster altered to recheck lights

corrosion on sump

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

corrosion on sump