2002 Audi A3

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Both rear tyres, rubber starting to perish

Front registration plate faded but not likely to be misread (6.3.1d)

brake disc worn, pitted or scored, but not seriously weakened Both front inner faces pitted (3.5.1i)

Brake pipe slightly corroded both rear (at rear) (3.6.B.2c)

Exhaust has a minor leak of exhaust gases at joint of cat to back (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

registration plate deteriorated but not likely to be misread both (6.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Brakes imbalanced across an axle 36% out (3.7.B.5b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Braking system leaking (3.6.A.1) DANGEROUS

Brake pipe slightly corroded both rear (at rear) (3.6.B.2c)

Exhaust has a minor leak of exhaust gases at joint of cat to back (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

registration plate deteriorated but not likely to be misread both (6.3.1d)

Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Offside front brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Headlamp aim beam image obviously incorrect (1.8.A.1b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Exhaust has a major leak of exhaust gases (7.1.2)

brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Centre Upper Stop lamp not working (1.2.1b)

Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)