2002 Honda XL125V

Clutch lever bent (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake component damaged and seriously reduced in strength caliper mounting bracket (3.2.A1) DANGEROUS

Clutch lever bent (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Offside Exhaust is leaking but is not excessively noisey under foot peg (7.1.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

exhaust system repaired

Front shock absorber seal failed and leaking oil Both (2.3.3)

Handlebar deformed (2.1.1b)

Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

exhaust system repaired

Rear Lower Exhaust is leaking but is not excessively noisey (7.1.1b)

gear change bolt loose

Front Upper Brake master cylinder fluid level dangerously low (3.2.B1d)

Offside Rear Footrest missing (6.2.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Lower Exhaust is leaking but is not excessively noisey (7.1.1b)

gear change bolt loose

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)