MOT Status
ExpiredMileage
231,851 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement inner tie bar bush (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive tie bar inner mount (5.3.6 (a) (i))
engine management warning lamp on
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim not tested (4.1.2 (b))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement inner tie bar bush (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner saddle bush (5.3.4 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive tie bar inner mount (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
engine management warning lamp on
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Anti-roll bar linkage has slight play in a ball joint both rears (2.4.G.2)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive under side (2.4.A.3)
Rear back plates corroded
Tyre worn close to the legal limit fronts (4.1.E.1)
Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both rear d bushes (2.4.G.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 27% (3.7.B.5b)
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 30% (3.7.B.5b)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Brake pedal creeps down when held under pressure (3.3.B.1a) DANGEROUS
Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both rear d bushes (2.4.G.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 27% (3.7.B.5b)
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 30% (3.7.B.5b)
Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
n/s/r tyre perished and cracked on inner sidewall
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV02 XXY is a 2002 Honda Cr-v in Black with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 77.3%.
Across all 2002 Honda Cr-v models, the average MOT pass rate is 73.6% with a typical mileage of 93,596 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying CV02 XXY, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 24 years old, this Honda Cr-v is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV02 XXY?
You can check the full history of CV02 XXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV02 XXY registered?
CV02 XXY is a 2002 Honda Cr-v, first registered on 17 June 2002.
Is CV02 XXY safe to buy?
The MOT history for CV02 XXY shows 22 tests with a 77.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV02 XXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV02 XXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.