MOT Status
ExpiredMileage
144,267 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Heavy surface corrosion on underside of vehicle
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Heavy surface corrosion on underside of vehicle
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Centre Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake hose inappropriately repaired (3.6.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Headlamp aim too low (1.8)
Offside Rear Tie bar/rod worn and seriously weakened (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear rear brake application uneven (3.7.B.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
all components and underside of vehicle corroded
Body has slight corrosion (6.1.B.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Child seat fitted not allowing full inspection of adult belt
heavy corrosion on underside of vehicle
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
rear brake hose ferrules are going rusty.
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV03 DHC is a 2003 Mazda 6 in Silver with a 1,999cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CV03 DHC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV03 DHC?
You can check the full history of CV03 DHC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV03 DHC registered?
CV03 DHC is a 2003 Mazda 6, first registered on 30 May 2003.
Is CV03 DHC safe to buy?
The MOT history for CV03 DHC shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV03 DHC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV03 DHC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.