2003 Ford Ka

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

engine light on

exhaust poor condition

front tyres cracking

rear tyres out of shape

sills in poor condition

corrosion to all prescribed areas but not considered excessive

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

corrosion to all prescribed areas but not considered excessive

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

both sills corroding

underbody corrosion

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

both sills corroding

underbody corrosion

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring incomplete (2.4.C.1a)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

165/60 14

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (3.3.A.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside front tyre worn very low on Inner edge

165/60 14

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (3.3.A.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside front tyre worn very low on Inner edge

both headlamp lenses tarnishing

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear coil spring incomplete (2.4.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Offside Stop lamp not working (1.2.1b)

both headlamp lenses tarnishing