MOT Status
ExpiredMileage
66,882 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust engine idle speed too high (7.3.D.1)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.B.1b) DANGEROUS
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
Central Front Exhaust has a minor leak of exhaust gases flexi joint (7.1.2)
Exhaust noisy (7.1.4)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Rear rusty around fuel filler cap
Offside Rear coil spring corroded (2.4.C.1b)
rusty around front suspension
Centre Front Exhaust has a minor leak of exhaust gases flexi (7.1.2)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front headlamp loose
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Centre Front Exhaust has a minor leak of exhaust gases flexi (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front brake discs slightly worn
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front brake discs slightly worn
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp aim too high (1.8)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Braking system leaking (3.6.A.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV03 KLA is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CV03 KLA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV03 KLA?
You can check the full history of CV03 KLA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV03 KLA registered?
CV03 KLA is a 2003 Ford Ka, first registered on 1 March 2003.
Is CV03 KLA safe to buy?
The MOT history for CV03 KLA shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV03 KLA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV03 KLA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.