2003 Ford Ka

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Service brake: efficiency below requirements (3.7.B.7)

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Power steering component(s) has slight seepage from a component (2.3.3b)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s, n/s sill corroding

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Inner Front Road wheel bead rim badly distorted (4.2.A.1a)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Front Power steering ram(s) has slight seepage from a seal (2.3.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear coil spring incomplete (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)