2003 Ford Ka

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch holed (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed (6.1.1 (c) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer Front passenger door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive wheel arch area (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 2 mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced both (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch upper and lower (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm (5.3.6 (a) (i))

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front tyre perishing

Brake pedal spongy (3.3.B.1b)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Outer Body has a sharp edge caused by corrosion sill (6.1.C.1)

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Outer Body has a sharp edge caused by corrosion sill (6.1.C.1)

Offside Rear Body has a sharp edge caused by corrosion sill end (6.1.C.1)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front tyre perishing

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Inner Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

engine management light stays on

n/s outer sill deteriorating

o/s/r main chassis member deteriorating

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

engine management light stays on

n/s outer sill deteriorating

o/s/r main chassis member deteriorating

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front suspension has slight play in a pin or bush of an lower wishbone inner bearing (2.5.B.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

o/s & n/s outer sills starting to corrode

Offside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing (2.5.B.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front suspension has slight play in a pin or bush of an lower wishbone inner bearing (2.5.B.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

o/s & n/s outer sills starting to corrode

Nearside Front suspension has slight play in a pin or bush of an lower wishbone inner bearing (2.5.B.1a)

Offside Front suspension has slight play in a pin or bush of an lower wishbone inner bearing (2.5.B.1a)

engine management light stays on

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

slight perishing on nearside rear tyre

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

slight perishing on offside front tyre

slightly worn offside wiper blade

Offside Rear coil spring fractured (2.4.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front coil spring fractured (2.4.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)