MOT Status
ExpiredMileage
127,661 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front pads low
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front pads low
Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Suspension arm locating pin retaining device not properly locked (2.4.G.3b)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension arm locating pin retaining device not properly locked (2.4.G.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Windscreen wiper blade insecure (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
2L engine oil added before test
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV04 VBB is a 2004 Mazda 6 in Blue with a 2,261cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2004 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 81,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CV04 VBB, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 22 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV04 VBB?
You can check the full history of CV04 VBB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV04 VBB registered?
CV04 VBB is a 2004 Mazda 6, first registered on 9 March 2004.
Is CV04 VBB safe to buy?
The MOT history for CV04 VBB shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV04 VBB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV04 VBB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.