2005 Ford Focus C-max

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

o/s/f wing holed/corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Handbrake requirements only just met

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Handbrake requirements only just met

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm pin or bush excessively worn Track control arm bush-as marked (5.3.4 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension arm pin or bush excessively worn Track control arm bush-as marked (5.3.4 (a) (i))

Offside Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick Both sides (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Rear axle corroded

Both rear shock absorber's deteriorated and reduced damping

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear tyre worn irregular

Both rear shock absorber's deteriorated and reduced damping

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear tyre worn irregular

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front exhaust mounting's broken

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear parking brake cable end excess corrosion

Offside Rear tyre wearing unevenly on inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)