MOT Status
ExpiredMileage
48,260 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Driver's door cannot be opened from outside the vehicle (6.2.3 (a))
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear boot floor (6.2.2 (d) (i))
Nearside Body component insecure Bonnet hinge (6.2.1 (a) (i))
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Brake prescribed area is excessively corroded Brake flexi mount point (1.1.21 (e) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis (6.2.2 (d) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i))
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Upper Coil spring fractured or broken (5.3.1 (b) (i))
Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake disc worn, pitted or scored, but not seriously weakened Worn (1.1.14 (a) (ii))
Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Seat mounts (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Bumper support bracket (6.2.2 (d) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Boot corner (6.2.2 (d) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Suspension arm pin or bush worn but not resulting in excessive movement Both lower arm front bushes (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced At radiator support bracket mounting area (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower arm front bush (5.3.4 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill seam area to floor (6.1.1 (c) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both rear trailing arm mounting brackets (5.3.3 (b) (i))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced At radiator support bracket mounting area (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower arm front bush (5.3.4 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill seam area to floor (6.1.1 (c) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both rear trailing arm mounting brackets (5.3.3 (b) (i))
Nearside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Rear Brake back plate corroded
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Near top mounting area (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules Both rear hoses (3.6.B.4e)
Rear Macpherson strut corroded but not seriously weakened Both rear struts (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Subframe mounting prescribed area is excessively corroded Leg area (2.4.A.3)
Nearside Rear Brake back plate(s) securing device excessively deteriorated Corroded/holes (3.5.1j)
Offside Front Subframe mounting prescribed area is excessively corroded Leg area (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded Floos to sill area (5.2.6)
Nearside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Rear Brake back plate corroded
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Near top mounting area (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules Both rear hoses (3.6.B.4e)
Rear Macpherson strut corroded but not seriously weakened Both rear struts (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Exhaust has a minor leak of exhaust gases At front flex pipe and CAT heat shield loose (7.1.2)
Front Subframe mounting prescribed area is corroded but not considered excessive Both front mounting legs (2.4.A.3)
Nearside Front Brake pipe to hose connector/nipple corroded
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive At floor / sill area (5.2.6)
Rear Both brake pipe connectors/nipples to rear hoses corroded
Rear Brake hose has slight corrosion to ferrules Both hoses (3.6.B.4e)
Brake hose has slight corrosion to ferrules Both rear hoses (3.6.B.4e)
Brake pipe slightly damaged Both rear brake pipe nipple connectors to brake hoses corroded (3.6.B.2c)
Exhaust flexi hose corroded wire mesh loose
Nearside Front Brake pipe slightly damaged PIPE NIPPLE / CONNECTOR TO BRAKE HOSE CORRODED (3.6.B.2c)
Suqeak in N/S/R brake drum
Exhaust system not adequately supported SUPPORT BAR CORRODED BROKEN AT FLEXI HOSE AND REAR BOX SUPPORT BRACKET LOOSE/BROKEN (7.1.1)
Nearside Seat belt anchorage prescribed area is excessively corroded near sill area (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded TRAILING ARM MOUNTING AREA (2.4.A.3)
Spare wheel carrier insecure CORROSION HOLES AT CARRIER LOCKING AREA AND HOLES IN BOOT FLOOR UNDER LIGHTS (6.4.2)
Both rear tyres perishing
Brake hose has slight corrosion to ferrules Both rear hoses (3.6.B.4e)
Brake pipe slightly damaged Both rear brake pipe nipple connectors to brake hoses corroded (3.6.B.2c)
Corrosion at petrol cap area
Nearside Front Brake pipe slightly damaged PIPE NIPPLE / CONNECTOR TO BRAKE HOSE CORRODED (3.6.B.2c)
Suqeak in N/S/R brake drum
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
offside rear chassis rail holed outside of the 12 inches
surface corrosion under vehicle
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
offside rear chassis rail holed outside of the 12 inches
surface corrosion under vehicle
Offside Rear coil spring corroded (2.4.C.1b)
rear tyres cracking
surface corrosion under vehicle
suspension components corroded
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear coil spring corroded (2.4.C.1b)
rear tyres cracking
surface corrosion under vehicle
suspension components corroded
slight cracking on rear tyres
surface corrosion under vehicle
Surface corrosion under vehicle
front wipers smearing and juddering slightly
offside front tyre worn inside edge on raised area
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV06 FVW is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CV06 FVW, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV06 FVW?
You can check the full history of CV06 FVW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV06 FVW registered?
CV06 FVW is a 2006 Ford Ka, first registered on 2 March 2006.
Is CV06 FVW safe to buy?
The MOT history for CV06 FVW shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV06 FVW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV06 FVW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.