MOT Status
ExpiredMileage
63,061 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Both rear tyres wearing uneven
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Both rear tyres wearing uneven
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive under engine (8.4.1 (a) (i))
rear number plate crack
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive under engine (8.4.1 (a) (i))
rear number plate crack
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Tyre worn close to the legal limit slick on inner edge 165/6513 (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/ axle mount area (2.4.A.3)
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Offside Front Tyre worn close to the legal limit slick on inner edge (4.1.E.1)
Oil leak ()
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis/closing panel area (2.4.A.3)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill,axle mount area (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/closing panel area (2.4.A.3)
Nearside Front Tyre worn close to the legal limit slick on inner edge 165/6513 (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/ axle mount area (2.4.A.3)
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Offside Front Tyre worn close to the legal limit slick on inner edge (4.1.E.1)
Oil leak ()
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear registration plate damaged
Items removed from driver’s view prior to test
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Valve stem slightly misaligned (4.1.D.1e)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Rear tyres slightly perished
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front coil spring fractured (2.4.C.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV06 NZM is a 2006 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CV06 NZM, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV06 NZM?
You can check the full history of CV06 NZM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV06 NZM registered?
CV06 NZM is a 2006 Ford Ka, first registered on 24 March 2006.
Is CV06 NZM safe to buy?
The MOT history for CV06 NZM shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV06 NZM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV06 NZM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.