MOT Status
ExpiredMileage
90,935 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake lever has insufficient reserve travel (1.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Brake hose excessively deteriorated loose (1.1.12 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt x 2 (5.3.4 (b) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Brake hose excessively deteriorated loose (1.1.12 (b) (ii))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover missing x 2 (5.3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both ball joints (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both ball joints (5.3.4 (b) (ii))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both inner sills corroded
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both inner sills corroded
Nearside Front coil spring fractured (2.4.C.1a)
Offside Inner Front Tyre has ply or cords exposed (4.1.D.1b)
Under-trays fitted obscuring some underside components
slight binding n/s front wheel
slight damage n/s front tyre outer wall
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Under-trays fitted obscuring some underside components
slight wear n/s+o/s rear tyres
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV06 OGR is a 2006 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2006 Mazda 6 models, the average MOT pass rate is 74.4% with a typical mileage of 76,651 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CV06 OGR, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 20 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV06 OGR?
You can check the full history of CV06 OGR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV06 OGR registered?
CV06 OGR is a 2006 Mazda 6, first registered on 19 April 2006.
Is CV06 OGR safe to buy?
The MOT history for CV06 OGR shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV06 OGR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV06 OGR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.