MOT Status
ExpiredMileage
64,516 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
front subframe mounting points heavily welded
o/s sill heavily welded
underside of car heavily welded and undersealed.
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near exhaust (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
front subframe mounting points heavily welded
o/s sill heavily welded
underside of car heavily welded and undersealed.
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear wing corroded
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i))
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear wing corroded
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front floors corroded
Offside Play in steering rack inner joint(s) ()
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sub frame mounting (6.2.2 (d) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive beam mounting (5.3.6 (a) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sub frame mounting (6.2.2 (d) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive beam mounting (5.3.6 (a) (i))
o/s inner sill / floor pan corroded
o/s/r tyre inner edge heavily scrubbed
slight play in o/s inner steering rack arm
under body corrosion through out
Coolant leak ()
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Coolant leak ()
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii))
Nearside Body has slight corrosion sill (6.1.B.2)
Offside Body has slight corrosion sill (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Body has slight corrosion sill (6.1.B.2)
Offside Body has slight corrosion sill (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
coolant level low
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
coolant level low
o/s/f tyre cracking
o/s/f tyre exessively worn on inner edge
Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front front brake application uneven (3.7.B.2)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV06 SXB is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CV06 SXB, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV06 SXB?
You can check the full history of CV06 SXB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV06 SXB registered?
CV06 SXB is a 2006 Ford Ka, first registered on 6 April 2006.
Is CV06 SXB safe to buy?
The MOT history for CV06 SXB shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV06 SXB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV06 SXB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.